SONY XL-2400 Lamp Replacement Video/Guide

8 Comments

1. risanch says:

   January 8, 2009 at 9:19 pm

   NICE N EASY!!
2. sikosis2 says:

   January 13, 2009 at 8:50 am

   Nice … got a video on the XL-2300 ?
3. tittymonster69 says:

   August 20, 2009 at 6:24 pm

   I just changed my bulb and the tv only has a red flashing power light, 3 blinks, somethings it will work for 10 mins then shut down..any ideas?
4. ntdgg24678 says:

   October 5, 2009 at 6:10 am

   Just thought I would let you know that sony does not make a DLP. There projection tv’s are called LCD projection, they do not have the mirrors like a DLP.
5. rostit420 says:

   October 7, 2009 at 6:42 pm

   ntdgg24678
   Your comment is pointless.

   That makes no difference. It also does not say DLP. All LCD/DLP/LCOS/SXRD use a form of backlight. The display technology is not set by the lamp. Some use Arc lamps, some of the newer units use LED.

   The video is well done and informative, unlike your comment.
6. rostit420 says:

   October 7, 2009 at 6:44 pm

   tittymonster69

   If it is shutting down after 10min, check your connections to the bulb. Also make sure you have adequate airflow. You may have a fan that is locking up or a bad ballast power supply. A common failure is the ballast as its only job is to power the arc inside the lamp. If the lamp is new, I would try another lamp first, and if it does the same with the new lamp, have the ballast replaced.
7. TheChrisnavarro says:

   February 28, 2010 at 11:35 pm

   Were is the ballast and were can i get it?
8. jazzwah says:

   March 7, 2010 at 8:41 am

   Thank you so much !!!! This really helped me replace the bulb myself. I bought a bulb on Amazon for $100 and saved big time. Thanks again. You guys rock.